Custom Fluorescent Penetrant Systems

Custom Fluorescent Penetrant Inspection (FPI) Equipment »

Fluorescent Penetrant Inspection (FPI) units are custom designed and built for small to large parts. NDT Unlimited offers a complete line of Custom Fluorescent Penetrant Inspection (FPI) Equipment designed, manufactured and assembled by hand in the United States to meet the demands of your specific application.

Fluorescent Penetrant Inspection (FPI) Systems are turn-key, engineered of top quality 16 ga. stainless steel and mild steel and professionally powder coated to a hard luster finish. NDT Unlimited FPI systems are supported by high quality lines of materials and accessories chosen specifically for their durability and ease of operation.

NDT Unlimited will happily provide designs and pricing for a custom built unit to meet your inspection needs.

Fluorescent Penetrant Inspection (FPI) Equipment: Water Washable (Method A) FPI Units

Small Part Processing »

Model:  NDT/LP 307 WW. Water Washable (Method A)  FPI Unit

NDT Unlimited NDT/LP 307 WW is a Water Wash Fluorescent Penetrant Inspection System with a unibody design for the inspection of low volume small parts.

General Specifications NDT Unlimited NDT/LP 307 WW
Electrical Requirements 230V or 460V, 60 Hz, Single Phase
Stations:
Penetrant Dip ¾” dia. Drain with shut off valve
Aluminum top hinged cover
Drain Expanded metal drain rack
Rinse Tri-con hose and nozzle assembly
Water pressure & temperature gauge
Parts rack on legs at bottom of tank, zinc plated
Drier Digital temperature controller – calibrated
Flame retardant vinyl curtains
Fenrod heaters
Temperature ga
Expanded metal shelf center & bottom, zinc plated
Dry Developer St. Economy dust collector, MDL: NDT-EDC wired to operate from front of station
Parts rack at bottom tank
Aluminum hinged cover
Inspection Booth Stand alone or attached Blacklight Assembly, Spectronics MDL: SB100P
Whitelight
Exhasut Fan
Overhead canopy with flame retardant vinyl curtains
Method B Available
Method D Available

Model:  NDT/LP 208 WW. Water Washable (Method A)  FPI Unit

NDT Unlimited NDT/LP 208 WW is a Water Wash Fluorescent Penetrant Inspection System with a unibody design for the inspection of low volume small to medium parts. 

General Specifications NDT Unlimited NDT/LP 208 WW
Electrical Requirements 230V or 460V, 60 Hz, Single Phase
Stations:
Penetrant Dip ¾” dia. Drain with shut off valve
Aluminum top hinged cover
Drain Expanded metal drain rack
Rinse Tri-con hose and nozzle assembly
Water pressure & temperature gauge
Parts rack on legs at bottom of tank, zinc plated
Drier Digital temperature controller – calibrated
Flame retardant vinyl curtains
Fenrod heaters
Temperature ga
Expanded metal shelf center & bottom, zinc plated
Dry Developer St. Economy dust collector, MDL: NDT-EDC wired to operate from front of station
Parts rack at bottom tank
Aluminum hinged cover
Inspection Booth Stand alone or attached Blacklight Assembly, Spectronics MDL: SB100P
Whitelight
Exhasut Fan
Overhead canopy with flame retardant vinyl curtains
Method B Available
Method D Available

Small to Medium Part Processing »

Small to Medium Parts Processing:  Water Washable (Method A)  FPI Unit

General Specifications MDL: NDT Unlimited NDT/LP 2424WW O.D.
MDL: NDT Unlimited NDT/LP 2436WW O.D.
MDL: NDT Unlimited NDT/LP 3636WW O.D.
MDL: NDT Unlimited NDT/LP 3648WW O.D.
Electrical Requirements 230V or 460V, 50/ 60 Hz, Single Phase or Three Phase
Stations:
Penetrant Dip OR Penetrant Spray Penetrant Dip: ¾” dia. Drain with shut off valve
Aluminum top hinged cover
Penetrant Spray: Overhead canopy with whitelight and blacklight
Counter-balanced doors
Full roller grille or zinc plated expanded metal rack
Air filter, regulator and gauge
Front splash panel
Aluminum filter bank
Options include: HVLP gun assembly & Mist Collector
Drain Full roller grille or expanded metal rack
¾” dia. Drain back to penetrant station
Rinse Overhead canopy with exhaust, whitelight & blacklight
Counter-balanced doors
Full roller grille or zinc plated expanded metal rack
Tri-con hose and nozzle assembly
Water pressure regulator & gauge
Temperature gauge
Front splash panel
1 ½” dia. drain
Rest Full roller grille or zinc plated expanded metal rack
Drier Double steel panel construction with insulation
Full roller grille or zinc plated expanded metal rack
Digital temperature controller – calibrated with light indicators
Insulated counter-balanced doors or flame retardant vinyl curtains
Fenrod heaters
Fan motor and blade
Rest Full roller grille or zinc plated expanded metal rack
Dry Developer St. Counter-balanced doors
Full roller grille or zinc plated expanded metal rack
Air filter, regulator & gauge
Front view window
Powder cone applicator
2 ½ gallon pressure pot to contain powder
Rear exhaust plenum
Options include: Dust Collector
Inspection Booth Overhead canopy with flame retardant vinyl curtains
Whitelight
Exhaust fan
Blacklight Assembly, Spectronics MDL: SB100P
Masonite table top
Method B Available
Method D Available

Large Part Processing »

Large Parts Processing:  Water Washable (Method A)  FPI Unit

General Specifications MDL: NDT Unlimited NDT/LP 4848WW O.D.
MDL: NDT Unlimited NDT/LP 4872WW O.D.
MDL: NDT Unlimited NDT/LP 7272WW O.D.
Electrical Requirements 230V or 460V, 50/ 60 Hz, Single Phase or Three Phase
Stations:
Penetrant Dip OR Penetrant Spray Penetrant Dip: ¾” dia. Drain with shut off valve
Aluminum top hinged cover
Penetrant Spray: Overhead canopy with whitelight and blacklight
Counter-balanced doors
Full roller grille or zinc plated expanded metal rack
Air filter, regulator and gauge
Front splash panel
Aluminum filter bank
Options include: HVLP gun assembly & Mist Collector
Drain Full roller grille or expanded metal rack
¾” dia. Drain back to penetrant station
Rinse Overhead canopy with exhaust, whitelight & blacklight
Counter-balanced doors
Full roller grille or zinc plated expanded metal rack
Tri-con hose and nozzle assembly
Water pressure regulator & gauge
Temperature gauge
Front splash panel
1 ½” dia. drain
Rest Full roller grille or zinc plated expanded metal rack
Drier Double steel panel construction with insulation
Full roller grille or zinc plated expanded metal rack
Digital temperature controller – calibrated with light indicators
Insulated counter-balanced doors or flame retardant vinyl curtains
Fenrod heaters
Fan motor and blade
Rest Full roller grille or zinc plated expanded metal rack
Dry Developer St. Counter-balanced doors
Full roller grille or zinc plated expanded metal rack
Air filter, regulator & gauge
Front view window
Powder cone applicator
2 ½ gallon pressure pot to contain powder
Rear exhaust plenum
Options include: Dust Collector
Inspection Booth Overhead canopy with flame retardant vinyl curtains
Whitelight
Exhaust fan
Blacklight Assembly, Spectronics MDL: SB100P
Masonite table top
Method B Available
Method D Available


    Our Clients

    ©Copyright 2021. All Rights Reserved.